HIGH PRESSURE NOZZLE JET + RETAINER SET for ALL KARCHER COMMERCIAL STEAM CLEANERS or PRESSURE WASHERS

Set Description - save money and replace both nozzle and retainer with this set.

• NOZZLE - Original Specification for all KARCHER HD / HDS commercial steam cleaners or pressure washers
•   Utilises the standard KARCHER captive nozzle system used on all KARCHER original commercial lances.
•   Replace frequently as nozzles wear out in normal use by the action of high pressure water passing through them.
•   Also replace as nozzles are subject to damage by being rested or struck on the ground. Don't lose performance!
•   Restores optimum cleaning power as a worn nozzle will lower the operating pressure of your pressure washer.
•   Also restores the sharp "cutting" ability of a new nozzle to remove dirt quickly, precisely and effectively.
•   Increases the impact pressure on the surface being cleaned. Fit a new nozzle and feel the difference!
•   Produces larger water droplets resulting in 40% more impact pressure than standard nozzles.
•   A quality nozzle made from hardened stainless steel AND complete with a 10 FREE o-rings. 
•   Work much quicker than with your old nozzle producing a "splayed" or "blurred" fan jet.
•   Available in various sizes to suit different pump outputs and ratings. See below how to order. 
• RETAINER - Protects the nozzle from damage AND protects surfaces from contact with steel nozzle.
•   Replace at the same time as fitting a new nozzle as it may have worn down so new nozzle will be exposed.
•   Also replace if black outer protective cover has come off altogether or spins around the internal nut.
•   Enables easy hand tightening or removal of retainer when quick access to nozzle is required.  
•   Fits all KARCHER original or after-market lances with an M18 male thread at the tip end.
•   Simply insert over nozzle and screw down by hand to securely hold the nozzle in place.
•   Picture shows the lance tip thread, o-ring, nozzle and retainer in sequence for guidance.
• O-RINGS - KARCHER Original Specification Heavy Duty O-Rings.
•   Fits ALL KARCHER Commercial Steam Cleaners & Pressure Washers rated up to 6,000psi.
•   Fits into recess behind the high pressure nozzle of a KARCHER lance tip (as shown in picture)
•   Also use within M22 female coupling of high pressure hose which relies on this o-ring to create a seal.
•   Also fits M22 female coupling between a KARCHER older-style non-swivel lance and trigger gun.
•   Stops leaks without overtightening and damaging fittings.
•   Replaces perished, split or all-together disappeared o-rings.
•   Simply hook out old one and replace with one of these o-rings.
•   Supplied in a waterproof resealable bag containing 10 o-rings for easy dispensing.